Description
Senator CSV15-7 15kW 7 Bar 93 cfm Variable Speed 4-in-1 Air Station with Dryer and 600L Tank
The Senator CSV15-7 is a 15kW (20 hp) 4-in-1 variable speed drive (VSD) rotary screw compressed air station set to a working pressure of 7 bar (102 psi), delivering 1.05-2.62 m³/min (37-93 cfm) of free air. It is a dependable, cost-effective source of compressed air for engineering and fabrication workshops, joinery and cabinet makers, food and packaging lines, printing and general manufacturing.
The Senator CSV Series is a complete 4-in-1 compressed air station with a variable speed drive: a VSD rotary screw compressor, 600 litre air receiver, refrigerant dryer and pre- and post-filters in a single cabinet. You get clean, dry air and up to 30% lower electricity use than a fixed speed system.
A 7 bar setting is ideal where your tools and equipment run at standard pressure, giving you the most air for every kilowatt of power.
Key Features
- Variable speed drive (VSD) can use up to 30% less electricity than a fixed speed system
- 4-in-1 design: VSD rotary screw compressor, 600 L air receiver, refrigerant dryer and two filters in one cabinet
- Delivers clean, dry air: filters remove particles down to 0.01 micron and limit oil carry-over to 0.01 ppm
- Refrigerant dryer in its own thermally separated compartment
- Timer drain valves plumbed to a single point for clean, automatic condensate disposal
- Largest-in-class 600 litre air receiver for stable system pressure
- Soundproofed cabinet with anti-vibration mounts for installation at the work site
- Spin-on oil filter and separator elements keep service downtime to a minimum
Lower Running Costs
Electricity makes up around 75% of the lifetime cost of an electric screw compressor. Because the CSV15-7 only runs as fast as your air demand requires, it avoids the wasted energy of a fixed speed machine running unloaded. Savings of 15 to 30% are typical, so the extra upfront cost is usually recovered in electricity savings, and VSD models like this one may be eligible for government energy efficiency grants.
Specifications
| Model | CSV15-7 |
| Product code | SE CSV15-7 |
| Drive | Variable Speed (VSD) |
| Motor power | 15 kW (20 hp) |
| Free air delivery @ 7 bar | 1.05-2.62 m³/min (37-93 cfm) – 1,050-2,620 L/min |
| Working pressure | 7 bar (102 psi) |
| Air receiver | 600 litres |
| Air treatment | Built-in refrigerant dryer, pre-filter and 0.01 micron post-filter |
| Noise level @ 1 m | 73 dB(A) |
| Air outlet | 1″ BSP |
| Dimensions (W x D x H) | 173 x 78 x 187 cm |
| Weight | 734 kg |
| Power supply | 400-415 V, 3-phase, 50 Hz |
| Warranty | 12 months parts and labour |
Free air delivery measured to ISO 1217. Specifications are subject to change by the manufacturer.
Compare Other Senator Models
Need a different pressure, more air or a fixed speed drive? These models are closely matched to the CSV15-7:
- Senator CSV15-8 – 15kW, 8 bar, variable speed
- Senator CSV15-10 – 15kW, 10 bar, variable speed
- Senator CSV11-7 – 11kW, 7 bar, variable speed
- Senator CS15-7 – 15kW, 7 bar, fixed speed
Why Buy From Air Compressors WA?
Air Compressors WA supplies, installs and services Senator air compressors across Perth and Western Australia. Every Senator compressor is fully inspected and load-tested in Australia before delivery and is backed by a 12-month parts and labour warranty and an Australia-wide service and spare parts network.
See the full Senator CSV Series range or browse all Senator air compressors. For advice on sizing, installation or delivery, call us on 1300 209 018 or email sales@aircompressorswa.com.au.








