Description
Senator CS4-10 4kW 10 Bar 18 cfm Fixed Speed 4-in-1 Air Station with Dryer and 600L Tank
The Senator CS4-10 is a 4kW (5.5 hp) fixed speed 4-in-1 rotary screw compressed air station set to a working pressure of 10 bar (145 psi), delivering 0.50 m³/min (18 cfm) of free air. It is a dependable, cost-effective source of compressed air for automotive workshops, panel and paint shops, tyre centres, small fabrication shops and light manufacturing.
The Senator CS Series is a complete 4-in-1 compressed air station: a rotary screw compressor, 600 litre air receiver, refrigerant dryer and pre- and post-filters, all built into one cabinet. It delivers clean, dry air straight out of the box and saves the floor space, pipework and installation cost of a traditional multi-component system.
The 10 bar setting gives extra pressure for heavier air tools, tyre equipment and longer pipe runs where pressure drop is a concern. If your air demand varies through the day, ask us about the variable speed CSV version.
Key Features
- 4-in-1 design: rotary screw compressor, 600 L air receiver, refrigerant dryer and two filters in one cabinet
- Delivers clean, dry air: filters remove particles down to 0.01 micron and limit oil carry-over to 0.01 ppm
- Refrigerant dryer in its own thermally separated compartment
- Timer drain valves plumbed to a single point for clean, automatic condensate disposal
- Largest-in-class 600 litre air receiver for stable system pressure
- High efficiency, MEPS-compliant motor with star-delta starter
- Soundproofed cabinet with anti-vibration mounts for installation at the work site
- Spin-on oil filter and separator elements keep service downtime to a minimum
Built to Run All Day
The CS4-10 is designed for steady, continuous air demand. Thermostat-controlled oil cooling, an oversized air-oil separator and heavy-duty bearings rated for over 100,000 hours mean it keeps running reliably shift after shift, even in hot Western Australian conditions.
Specifications
| Model | CS4-10 |
| Product code | SE CS4-10 |
| Drive | Fixed Speed |
| Motor power | 4 kW (5.5 hp) |
| Free air delivery @ 10 bar | 0.50 m³/min (18 cfm) – 500 L/min |
| Working pressure | 10 bar (145 psi) |
| Air receiver | 600 litres |
| Air treatment | Built-in refrigerant dryer, pre-filter and 0.01 micron post-filter |
| Noise level @ 1 m | 62 dB(A) |
| Air outlet | 3/4″ BSP |
| Dimensions (W x D x H) | 173 x 78 x 178 cm |
| Weight | 524 kg |
| Power supply | 400-415 V, 3-phase, 50 Hz |
| Warranty | 12 months parts and labour |
Free air delivery measured to ISO 1217. Specifications are subject to change by the manufacturer.
Compare Other Senator Models
Need a different pressure or more air? These models are closely matched to the CS4-10:
- Senator CS4-7 – 4kW, 7 bar, fixed speed
- Senator CS4-8 – 4kW, 8 bar, fixed speed
- Senator CS6-10 – 5.5kW, 10 bar, fixed speed
Why Buy From Air Compressors WA?
Air Compressors WA supplies, installs and services Senator air compressors across Perth and Western Australia. Every Senator compressor is fully inspected and load-tested in Australia before delivery and is backed by a 12-month parts and labour warranty and an Australia-wide service and spare parts network.
See the full Senator CS Series range or browse all Senator air compressors. For advice on sizing, installation or delivery, call us on 1300 209 018 or email sales@aircompressorswa.com.au.







